Nasa’s next Moon Promise rover runs on plutonium, built with Mars mission leftovers


Nasa's next Moon Promise rover runs on plutonium, built with Mars mission leftovers

Nasa is developing a nuclear-powered lunar rover designed to explore the Moon’s South Pole, search for water ice and map resources that could support future human missions. The rover, named PROMISE, is targeted for launch in late 2028 aboard a Blue Origin Blue Moon Mark 1 lander.Short for Polar Rover for Observation, Mapping, and In-Situ Exploration, PROMISE is being built largely using spare components and engineering testbed hardware originally developed for NASA’s Curiosity and Perseverance Mars missions.The SUV-sized, six-wheeled rover will use a plutonium-238-powered radioisotope thermoelectric generator (RTG) to produce continuous electricity and heat. This will allow it to operate in permanently shadowed lunar craters and withstand the Moon’s roughly 14-day-long nights, when temperatures can fall below minus 200 degrees Fahrenheit.According to NASA’s mission overview and a November 7, 2026, Moon Base programme announcement, engineers at the agency’s Jet Propulsion Laboratory (JPL) in Southern California are assembling the rover using flight-spare components and ground-based test hardware from the two Mars missions.Repurposing Mars mission hardwarePROMISE measures about 9.5 feet (2.9 metres) in length and weighs approximately 2,260 pounds (1,025 kg) without fuel. It will use JPL’s established rocker-bogie suspension and mobility system, which has been used on Mars rovers.Reusing existing hardware is intended to reduce development time and costs compared with building an entirely new rover. Blue Origin is expected to deliver PROMISE to the lunar South Pole, where it will begin an 18-month primary mission to survey the terrain, map resources beneath the surface and help identify safe landing sites for future astronauts.

How the plutonium-powered system works

PROMISE will carry a flight-spare Multi-Mission Radioisotope Thermoelectric Generator (MMRTG), which will provide power independently of sunlight.The system does not work like a conventional nuclear reactor. Instead of splitting atoms through a controlled fission process, the MMRTG uses heat produced by the natural radioactive decay of plutonium-238.Thermocouples convert this heat into electricity. The generator is expected to produce about 110 watts of electrical power at the beginning of the mission. Excess heat will be circulated through fluid loops to keep the rover’s electronics, batteries and mechanical systems warm.The continuous supply of heat and electricity will allow PROMISE to operate in regions that receive little or no sunlight, including permanently shadowed craters near the lunar South Pole. It will also help the rover survive the long lunar night, when solar-powered systems face extended periods without sunlight.

Rover to drill for water ice

One of PROMISE’s primary objectives will be to investigate whether water ice is present beneath the lunar surface and assess its potential availability for future missions.The rover’s scientific payload draws heavily on instruments developed for Nasa’s VIPER lunar rover. Its equipment will include the TRIDENT drill, built by Honeybee Robotics, which can penetrate up to 3.3 feet (one metre) into the lunar soil, known as regolith. The drill will help measure soil strength and temperature.PROMISE will also carry spectrometers, including MSOLO and NIRVSS, along with a neutron spectrometer. These instruments will look for hydrogen and analyse vaporised materials to determine whether water ice and other volatile substances are present beneath the surface.The rover will also test NASA’s next-generation High Performance Spaceflight Computing (HPSC) processor. Another planned feature is a “Lunar Dashcam” derived from the landing cameras used on Perseverance, along with onboard spotlights to help it navigate in complete darkness.Despite the use of hardware developed for Mars missions, adapting the components for the Moon presents several technical challenges.The rover will have to withstand extreme temperature variations, abrasive and electrostatically charged lunar dust, and the environmental conditions inside permanently shadowed regions. Its plutonium-powered system will also require stringent nuclear launch safety reviews.Space policy analysts at The Planetary Society have noted that requalifying Mars testbed hardware for lunar conditions could create engineering and scheduling challenges.PROMISE is intended to help Nasa assess the lunar South Pole before future crewed missions and planned Moon Base operations. Its findings on terrain, subsurface resources and water ice could help inform decisions about where astronauts may eventually land and operate on the Moon.

एक उत्तर छोड़ें

आपका ईमेल पता प्रकाशित नहीं किया जाएगा। आवश्यक फ़ील्ड को * से चिह्नित किया गया है